Products

TRAC Outdoors G3 Anchor Winch Wireless Remote Kit

Camco’s TRAC Outdoors G3 Anchor Winch Wireless Remote Kit allows you to wirelessly raise and lower your anchor. It provides remote control push-button anchor winch operation. You can use the wireless remote anywhere in the boat, or use it like a dash-mounted switch. Product clips into a useful storage bracket that can be mounted on your helm or other locations on your boat. For use with the TRAC G3 Fisherman 25 (69002/T10108-G3) or Pontoon 35 (69003/T10109-G3).

TRAC Outdoors Hardware Pack (For TRAC G3 Electric Anchor Winches)

The TRAC Outdoors Hardware Pack works with TRAC G3 electric anchor winches. It is compatible with the following anchor winch models: Fisherman 25 (69002), Pontoon 35 (69003), Angler 30 (69004), and Deckboat 40 (69005). This hardware pack includes: (7) M8-1 1/4 x 75 hex head bolts, (7) M8 flat washers, (7) M8 lock washers, and (7) M8-1 1/4 nuts.

TRAC Outdoors High-Current Trolling Motor Connector Kit, 8-Gauge

The Trac Outdoors High-Current Trolling Motor Connector Kit allows you to upgrade your trolling motor connectors to high-current 60-amp, 12V, 24V or 36V power. The kit features (2) quick connect plugs— one for your boat battery and one for trolling motor or other device. Includes a 1 ½-inch round hole adaptor, U-bracket, pigtail wires and heat shrink butt-splices. Connectors are composed of (2) 8-gauge, heavy marine-grade tin-plated copper wires.

TRAC Outdoors Isolator Bolts, 4-Pack

Install your anchor winch, trolling motor and other accessories from the top of your boat deck.

TRAC Outdoors Isolator Bolts, 8 Pack

Install your anchor winch, trolling motor and other accessories from the top of your boat deck.

TRAC Outdoors Mounting Plate- AnchorZone 20 / StrikeZone 25

Mounting plate for AnchorZone 20 and StrikeZone 25 anchor winches.

TRAC Outdoors Mounting Plate- G3 Fisherman25 / Angler30 / Pontoon35 / Deckboat40

TRAC installation modules allow anchor winches to be installed in elevated bow location or on the transom. Fishing boat, family cruiser, party barge, cataraft and even kayak – all are great applications for one of seven TRAC Electric Anchor Winch models; and now there’s a module to make installation much easier. Machined from aircraft aluminum, sand blasted, and anodized gunmetal gray. Stainless steel hardware included

TRAC Outdoors Pontoon 35-G3 Electric Anchor Winch

The TRAC Outdoors Pontoon 35-G3 Electric Anchor Winch allows you to automatically raise and lower your anchor with easy-to-use buttons. It has a maximum anchor capacity of 35 lb. and provides simple, smooth operation with excellent holding power. This winch features a high-efficiency, 12-volt DC, all-steel gear motor that uses less battery power than other brands. This product includes: 100-feet of pre-wound double-braid anchor rope, separate or integrated anchor roller, circuit breaker, sealed membrane UP/DOWN switch, marine-grade battery wire, assembly hardware and instructions (anchor not included). Includes a limited one-year warranty.

TRAC Outdoors Portable Bilge Pump

The TRAC Outdoors Portable Bilge Pump helps remove excess water from the bottom of Jon boats, utility boats, dinghies, inflatable boats, and other small watercraft. This pump operates using (3) D-cell batteries (not included), allowing it to serve as a back-up bilge pump during emergencies. It can also remove fluids in many non-marine applications. This product has a 250 GPH flow rate at zero head. The bilge pump runs dry without damage and can be completely submersed. Product measures 5-inches x 5-inches x 12-inches and includes a ¾-inch x 36-inch hose that easily reaches from the bottom of your boat to discharge water with ease. Mounts using the provided suction cups or mounting screws.

TRAC Outdoors StrikeZone 25 Electric Anchor Winch

The TRAC Outdoors StrikeZone 25 Electric Anchor Winch allows you to automatically raise and lower your anchor with easy-to-use buttons. It has a maximum anchor capacity of 25 lb. and provides simple, smooth operation with excellent holding power. This winch features a high-efficiency, 12-volt DC, all-steel gear motor that uses less battery power than other brands. This product includes: 100-feet of 5/32-inch pre-wound braided anchor rope, automatic resetting circuit breaker, sealed membrane switch, 14-gauge marine-grade battery wire (12-feet in length), anchor safety chain and assembly hardware (anchor not included). Includes a limited one-year warranty.

TRAC Outdoors Thru-Hull Pump, 600 GPH

Self-priming, 12V centrifugal pump. Ideal for all watercraft. Designed for easy installation and retrofitting. 600 GPH 3/4-inch outlet.

TRAC Outdoors Thru-Hull Pump, 800 / 1100 GPH

Self-priming, 12V centrifugal pump. Ideal for all watercraft. Designed for easy installation. 800 GPH 3/4-inch outlet and 1100 GPH 1 1/8-inch outlets in one package. 3/4-inch Dia. Outlet = 800 GPH; 1 1/8-inch Dia. Outlet = 1100 GPH; 5 AMP FUSE – 12V DC; 3.7A @ 13.6V DC

TRAC Pump, Gear Lube

TRAC Side Mount, 12 Degree

TRAC installation modules allow anchor winches to be installed in elevated bow location or on the transom. Fishing boat, family cruiser, party barge, cataraft and even kayak – all are great applications for one of seven TRAC Electric Anchor Winch models; and now there’s a module to make installation much easier. Machined from aircraft aluminum, sand blasted, and anodized gunmetal gray. Stainless steel hardware included.12° angle model

TRAC Side Mount, 90 Degree

T10194 Transom and Side Mount. TRAC installation modules allow anchor winches to be installed in elevated bow location or on the transom. Fishing boat, family cruiser, party barge, cataraft and even kayak – all are great applications for one of seven TRAC Electric Anchor Winch models; and now there’s a module to make installation much easier. Machined from aircraft aluminum, sand blasted, and anodized gunmetal gray. Stainless steel hardware included. 90° angle model

TRAC Spacer, Pedestal

TRAC Swivel Pulley, Open Block for Pot Puller

This 316 Stainless Steel multi-functional pulley is a must have for hauling line and pulling traps. The open block design allows quick rope work. The swivel allows for multiple angles of use.

TRAC Vehicle Wiring Kit

Vehicle Wiring Kit

Trailer Aid Holder

Camco's Trailer Aid Holder is ideal for storing your Trailer Aid tire changing tool. You simply mount this metal holder on the wall of your trailer and the Trailer Aid fits securely. The mounting hardware is not included.

Trailer Aid PLUS, Yellow, boxed

Trailer Aid PLUS, Yellow, boxed

Trailer Tongue Ball & Plate

Trailer Tongue Ball & Plate

Trailer Tongue Jack, Swivel - 1,000 lb

Camco's Bolt-On Trailer Tongue Jack is designed for use with boat and utility trailers. It is constructed of durable rust-resilient zinc-plated steel. Includes all mounting hardware to accommodate up to a 5" trailer frame. Wheel swivels for ease of use. 1,000 lb. capacity.